MOBILE :
+(91)-9737 042585
Fire Protection
Detail :
- Brick-red Color | nonflammable | provides a fireproof acoustic seal
- Easy-to-read gauge tells you fire extinguisher is charged and ready for use
- Clear instruction label using graphics to show steps required to operate extinguisher
- Easy-to-pull safety pin; tough impact resistant metal valve, handle, and lever
Detail :
- Capacity : ABC2 kg & 4Kg
- Type : Lug Bracket
- Color : Multicolor
- Material : Aluminium
- Compatible With : Round Bottom
Detail :
- Hand Controlled Discharge
- Safety Valve
- Co2 Gas Propellant
- Weather Resistant Epoxy
- Polyester base powder Coating
Detail :
- Hand Controlled Discharge
- Nitrogen Gas Propellant
- Pressure Indicator Pressure Gauge
- Weather Resistant Epoxy
- Polyester base powder
Detail :
- Greater Safety for users – No need to face dangerous flames and gases at close distances.
- No false alarms, or tampering – can not be activated without fire.
- Flexible, aesthetic design and simple installation – tabletop or wall mount.
- No inspection and maintenance requirement for life span of the product
- Lower Total Cost of protection over the life span of the product:
Detail :
- hose is a fabric-covered, flexible hose used to bring water from the fire pumper to the nozzle.
- This hose ranges in nominal inside diameter from 1.5 to 3 in (38 to 76 mm).
- designed to operate at pressures up to about 400 psi (2,760 kPa).
Detail :
A fire fighting landing valve is a core part of the hose system that acts as a manual stop valve giving you complete control over your fire fighting system. By rotating the landing valve handle anti-clockwise, you can simply activate the water flux in the fire fighting system.
Detail :
A double headed hydrant valve consists of a common inlet and body with two outlets. This will havetwo bonnets, stems and wheels. Double headed hydrant valves were earlier being used where higher flows were required due to severe hazards i.e. you could connect two hoses from the double headed hydrant.
Detail :
A fire hydrant, also called fireplug, is a connection point by which firefighters can tap into a water supply.
Detail :
Branch Pipes. Safequip provides a wide range of branch pipes that gets attached to a coupling at the end of a fire hose that directs, shapes and regulates the flow of the extinguishing fluid.
Detail :
The Collecting Breechings work in completely the opposite direction to the Dividing Breechings and give the user the ability to have two water feed hoses supplying one outlet. As with the Dividing Breechings these can be supplied as ‘Standard’ or ‘Controlled’.
Detail :
A fire hose (or firehose) is a high-pressure hose that carries water or other fire retardant (such…. The fire trucks have been equipped with adapters to allow them to work with both Storz and Guillemin connectors.
+91-9909016714